Plastic tanks are not suitable for ultrasonic applications because they inhibit ultrasonic waves, reducing the available ultrasonic cleaning power from 60% to 90%.

潛式(或immersible)清洗系統由超聲波發生器供電，這些發電機由304或316不銹鋼制成的傳感器包裝。這些包包含一個雙堆棧潔升超聲波高效率超聲換能器。它們通常安裝在底部或現有水箱的側壁，以促進均勻分布的超聲波清洗在其被淹沒的超聲波清洗機。傳感器包帶有特殊的帶孔的安裝標簽，并設計為永久性地附加在油箱上。

The submersible (or immersible) cleaning system is powered by ultrasonic generators, which are packaged with sensors made of 304 or 316 stainless steel. These packages contain a dual stack clean lift ultrasonic high efficiency ultrasonic transducer. They are usually installed at the bottom or the side wall of the existing water tank to promote the uniform distribution of ultrasonic cleaning in its submerged ultrasonic cleaning machine. The sensor package has a special mounting label with holes and is designed to be permanently attached to the fuel tank.

潛水系統配有25kHz，40kHz，80kHz，或交叉火力多頻超聲波系統。

The diving system is equipped with 25kHz, 40KHz, 80kHz, or cross fire multi frequency ultrasonic system.

您選擇的頻率將決定您安裝的換能器包的大小。大多數測量3-4“高，這是與您將失去的空間數量，您將失去在現有的超聲波清洗機，一旦潛水清潔系統安裝。

The frequency you choose will determine the size of the transducer package you install. Most measure 3-4 "high, which is the amount of space you will lose, and you will lose in the existing ultrasonic cleaning machine once the diving cleaning system is installed.

潔升超聲波技術人員將幫助雙方確定哪一頻率是好的具體應用，并決定佳位置安裝傳感器包在您的超聲波清洗機。

Jiesheng ultrasonic technicians will help both parties determine which frequency is good for specific applications, and decide the best location to install the sensor package in your ultrasonic cleaning machine.

該傳感器包通過射頻屏蔽電纜連接到超聲波發生器，該電纜配有快速斷開裝置。有兩種方法可以將電纜傳遞到水箱中：通過艙壁安裝(基本上就是一個密封的孔)通過底部的水箱，或者通過我們稱之為的立管，它看起來有點像一種由不銹鋼制成的剛性的潛水，它通過了。超聲波清洗機的頂部。

The sensor package is connected to the ultrasonic generator through an RF shielded cable equipped with a quick disconnect device. There are two ways to transfer the cable to the water tank: through the bulkhead installation (basically a sealed hole), through the bottom water tank, or through what we call the riser. It looks a bit like a rigid diving made of stainless steel. It passes through. The top of the ultrasonic cleaning machine.

這兩種進入路線都有正反兩面。許多客戶更喜歡購買立管式變頻器，因為他們不想在他們的油箱底部制造一個洞。使用立管的主要缺點是它們可能會干擾安裝在頂部的蓋子或其他系統部件。大多數潔升超聲波潛水器是定制制造的，目的是大限度地發揮超聲波系統的效能，并盡量減少可能的死點。我們是一家免費提供這項服務的制造商。我們還有一套標準的超聲波潛水系統。

Both entry routes have pros and cons. Many customers prefer to buy riser converters because they don't want to make a hole in the bottom of their tank. The main disadvantage of using risers is that they may interfere with top mounted covers or other system components. Most Jiesheng ultrasonic submersibles are custom-made to maximize the effectiveness of the ultrasonic system and minimize possible dead spots. We are the only manufacturer to provide this service free of charge. We also have a standard ultrasonic diving system.

以上就是今天小編給大家提供的精彩內容，更多的精彩內容請點擊進入我們的官方網站：超聲波清洗機價格http://www.yourlove.com.cn

The above is the wonderful content provided by Xiaobian today. For more wonderful content, please click to enter our official website: price of ultrasonic cleaning machine http://www.yourlove.com.cn