懸掛式自動超聲波清洗機在工作的過程中主要是采用懸掛鏈輸送,傳送速度:0-2m/min，被清洗工件在每道工序中能自轉。本機采用高壓熱水循環噴淋,清洗壓力:0.32MPa，特種功能可按客戶要求設計制造。
The hanging type automatic ultrasonic cleaning machine is mainly transported by hanging chain in the process of operation. The transmission speed is 0-2m/min, and the cleaned workpiece can rotate automatically in each process. This machine adopts high-pressure hot water circulating spray, cleaning pressure: 0.32MPa, special functions can be designed and manufactured according to customer requirements.
懸掛式自動超聲波清洗機的主要適用范圍：
Main scope of application of suspended automatic ultrasonic cleaning machine:
機械零部件,液壓件,傳動軸,齒閥體,電動機機殼汽車零件等大型零件.
Mechanical parts, hydraulic parts, transmission shaft, gear valve body, motor casing, auto parts and other large parts
懸掛式自動超聲波清洗機的特點：
Features of suspended automatic ultrasonic cleaning machine:
設備采用循環傳動清洗工件，經超聲清洗，噴淋漂洗達到清洗效果，適用于機械零件，電子零件，醫療器件等的除塵除油，除污的連續大批量清洗作業。
The equipment adopts the circulating transmission to clean the workpiece, and the cleaning effect is achieved by ultrasonic cleaning and spray rinsing. It is applicable to the continuous large batch cleaning operation of dust removal, oil removal and dirt removal of mechanical parts, electronic parts, medical devices, etc.

非標超聲波清洗設廠家告訴您：根據客戶的清洗要求，可調整清洗工序及結構形式定制專用超聲清洗機。
The manufacturer of non-standard ultrasonic cleaning equipment tells you that according to the cleaning requirements of customers, the special ultrasonic cleaning machine can be customized by adjusting the cleaning process and structure.
懸掛式自動超聲波清洗機的主要適用范圍：
Main scope of application of suspended automatic ultrasonic cleaning machine:
主要適用機械零部件、法蘭、軸承、液壓件閥體、油嘴油泵、汽柴油機殼等大型零件清洗。
It is mainly used for cleaning large parts such as mechanical parts, flanges, bearings, hydraulic parts, valve bodies, nozzle oil pumps, steam and diesel engine casings.
技術參數：
Technical parameters:
1、 采用懸掛式鏈輸送，傳動速度：0～2m/min
1. Suspended chain transmission is adopted, transmission speed: 0~2m/min
2、 清洗工作：回轉直徑400㎜，高300㎜（根據客戶工件而定）。
2. Cleaning work: rotating diameter 400 mm, height 300 mm (depending on the customer's workpiece).
3、 被清洗工件在每道工序中能自轉。
3. The cleaned workpiece can rotate automatically in each process.
4、 本機采用高壓熱水循環噴淋，清洗壓力：0.32mpa。
4. The machine adopts high-pressure hot water circulating spray, and the cleaning pressure is 0.32mpa.
5、 傳動速度可調，超聲功率、頻率、清洗槽大小根據客戶清洗工藝定制。
5. The transmission speed is adjustable, and the ultrasonic power, frequency and cleaning tank size are customized according to the customer's cleaning process.
6、 特種功能可根據客戶要求設計
6. Special functions can be designed according to customer requirements