服務熱線電話
400-6188-756
超聲波清洗機有哪幾種溫控方式?
來源:http://www.yourlove.com.cn/ 時間: 2024-05-28 瀏覽次數: 0
1、數控面板加熱
1. CNC panel heating
一般實驗室使用的數控超聲波清洗機,帶加熱功能的機型,為數控按鈕加熱。數控區顯示當前溫度,可設置溫度值。當達到加熱值時,自動停止加熱。這種加熱一般用硅膠板加熱。
The CNC ultrasonic cleaning machine commonly used in laboratories, with a heating function model, is equipped with a CNC button for heating. The CNC area displays the current temperature, and the temperature value can be set. When the heating value is reached, the heating automatically stops. This type of heating is usually done using a silicone plate.
2、機械溫度控制
2. Mechanical temperature control
普通超聲波清洗機一般采用機械控溫,即旋鈕調節溫度。
Ordinary ultrasonic cleaning machines generally use mechanical temperature control, which means adjusting the temperature with a knob.
3、溫控器加熱
3. Temperature controller heating
分體式超聲波清洗機可根據使用情況通過溫控器進行加熱。
The split type ultrasonic cleaning machine can be heated through a temperature controller according to the usage situation.

使用方法如下:按下加熱開關,溫控器將顯示測量溫度和控制溫度。上方顯示的是測量溫度,下方顯示的是控制溫度。當被測溫度低于控制溫度時,溫控器上的out燈亮,加熱指示燈亮,設備處于加熱狀態;當被測溫度高于控制溫度時,溫度控制儀表上的out燈滅,加熱指示燈滅,設備停止加熱。
The usage method is as follows: Press the heating switch, and the temperature controller will display the measured temperature and the controlled temperature. The temperature measurement is displayed above, and the temperature control is displayed below. When the measured temperature is lower than the control temperature, the out light on the temperature controller lights up, the heating indicator light lights up, and the equipment is in a heating state; When the measured temperature is higher than the control temperature, the out light on the temperature control instrument goes out, the heating indicator light goes out, and the equipment stops heating.
控制溫度設置方法:按撥號鍵設置控制溫度,控制溫度為58度。這種類型一般采用加熱管加熱。
Temperature control setting method: Press the dial key to set the control temperature to 58 degrees. This type generally uses heating tubes for heating.
以上就是有關:超聲波清洗機 的介紹,想了解更多的內容請點擊:http://www.yourlove.com.cn 我們將會全心全意為您提供滿分服務,歡迎您的來電!
The above is an introduction to ultrasonic cleaning machines. To learn more, please click: http://www.yourlove.com.cn We will wholeheartedly provide you with full score service. Welcome to call us!
相關文章
-
低溫廢水處理設備提高水質回收率,減少委外處理量,從環保綠色角度保護水資源 2026-02-19
-
噴淋清洗機實操詳解!304不銹鋼打造,清洗漂洗風切一體,新手也能看懂 2026-02-13
-
高壓去毛刺清洗機實測!替代4-5個熟練工,手機中框去毛刺干凈又省成本 2026-02-12
-
重工清洗破局!8噸承重+3.2米大托盤,單工位旋轉噴淋機,油污一鍵清零 2026-02-10
-
10萬就能定制!通過式清洗機實操拆解,3工位+304不銹鋼,省工又省水 2026-02-06
-
濾芯堵塞=故障高發!碳氫清洗機90%常見問題速解指南 2026-02-04
-
大件清洗破局!科爾通過式噴淋清洗機,360°無死角解鎖高效潔凈 2026-02-02
-
CNC高壓清洗機!復雜工件清洗,高效省心還精準 2026-01-30
-
10萬就能做!可定制通過式噴淋清洗機,解決各類清洗難題 2026-01-28
-
工業清洗想省心?這款噴淋清洗機,輕松搞定各類零件污漬 2026-01-27

新聞中心




常見問題







魯公網安備37011202000628號